1 / 4
EnXlosure with Smoke Detector and Filter and BlazeCut — zdjęcie 1
1 / 4

EnXlosure with Smoke Detector and Filter and BlazeCut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EnXlosure top part with added AlveoONE filter, BlazeCut and Satel DRP-100 Smoke Detector.

Ocena
0 / 5
Polubienia
7
Pobrania
34
Wydruki
0
Wyświetlenia
536
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This Remix adds holdes for a AlveoONE filter, a mounting relief for a Satel DRP-100 Smoke Detector and mounts for a BlazeCut.

The smoke detector needs a powersupply of 24V and a circuit that triggers at currents >10 - 20mA. It shall cut the power of the printer and filter fan to stop anything that supports a starting fire.

For the last rescue the BlazeCut will kill the fire.

To raise the filter please print the tightening ring a second time with a hight of 50 mm. Otherwise it will interfere with the print head cables. Replace the screws with M3x70 mm.

You also need the mount for the smoke detector and extract the contacts.

 

Print with supports on the smoke detector mount