Crutch holder clamp (Prusa clamp remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification to the PETG Prusament clamp that turns it into a holster to hold a crutch securely.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 201
- Wydruki
- 2
- Wyświetlenia
- 1208
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
A desk-mountable clamp with an attached holster to hold a crutch securely. Made to help a colleague who needed to use a crutch while at work, but there was no good way to keep it nearby while sitting at a desk, as it would keep falling on the floor.
Remixed from the PETG Prusament clamp -Modified the lower section to better fit under desks, and added a holster designed to hold the crutch just below its hand grip.
Print files in PETG, and secure the holster to the frame with an M3x30 socket screw in the upper hole, and an M3x10 socket screw in the lower hole. Screw the printed thread piece upwards into the centre of the clamp frame, then push-fit the jaw onto the spherical end piece.