LEGO set 10330 McLaren Senna Formula 1 car tyres/wheel with or without logo's
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
7,00 € – 8,56 € netto (bez VAT)
Dla pliku: Lego 10330 Senna Wheel Full set 7h30m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 7,78 € netto (środek widełek).
- Masa podana przez autora
- 103 g
- Czas druku podany przez autora
- 7,51 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
LEGO set 10330 McLaren Senna Formula 1 car tyres/wheel with or without logo's https://www.ebay.ie/itm/156148256811
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 421
- Wydruki
- 1
- Wyświetlenia
- 3629
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's.
My version has the 6 holes in the hub like the original.
Lay the wheel on it's back. You will need supports.
Back wheel to a size that is more like the original F1 wheel with and without logo.
Front wheel with logo
I have made an Alain Prost
https://www.printables.com/model/944664-prost-version-lego-set-10330-mclaren-formula-1-car
If you can't print these yourself you can purchase these at this link - https://www.ebay.ie/itm/156148256811