SWISS ARMY KNIFE POCKET CLIP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pocket clip for swiss army knife ( Huntsman or 91mm scales )
- Ocena
- 4,667 / 5
- Polubienia
- 74
- Pobrania
- 292
- Wydruki
- 3
- Wyświetlenia
- 4066
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Idea
As a designer and maker having a knife or a multitool is an absolute must for me.
In fact, I always have my swiss army knife in my pocket, but sometimes it could be uncomfortable or difficult to take it out of there.
I already saw a bunch of pocket clips online for swiss knives but found them a little bulky.
You also need to buy them.
What if I wanted to do everything at home in my studio? Well… I designed these scales with a pocket clip attached that you can 3d print at home in under 40 minutes.
What do you need
- Swiss army knife ( Huntsman or similar with 91mm scales )
- 2 little screws M2.3x6mm or similar ( screw holes are Ø2mm, 5mm deep // space for screw head is Ø4mm, 2mm deep )
- A tutorial video if you have no idea on how to change scales on your swiss knife ( Just like me )
- https://www.youtube.com/watch?v=DzfB7OZ70sc ← This one is very well done and the guy is super fun to watch!
Printing setting
No support // No brim
I used 0.35mm FAST // 0.20mm 100mms profiles from PrusaSlicer and setting for Prusament PLA
I'm sure that your standard settings are good to go.
Notes
- There is a scale for the other side of the knife but you can print only the clip and scales for the clip.
- Clip and scales are separated for convenience if you want them in different colors as I did.
- Try to use a top/bottom fill pattern ( Hilbert curve has a really nice look )
- As base curve and model, I used .step files from this designer → https://www.prusaprinters.org/social/118090-3dprintedman/prints