Gridfinity Refined for U.S. General v2 26" Cabinet - side Lip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old! See description. This is a finish for Gridfinity Refined for the side of the US General v2 Cabinet - 26" drawers.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Update: I have designed a new drawer layout. You can check it out here.
-----------------------------------------------------------
This is a finish for the US General Cabinet - 26" v2. The Drawers fit 13x11 bins and will have 20mm on the sides and 40mm on the top or bottom left over. My bambu labs printer can print 6x6 baseplates - these add the 13th bin and the 20mm finish.
This solution has Pros and Cons. The biggest Pro is that you gain a 20mm slot on the side of the drawer that you can use to store long tools, like this 12 inch/30cm screwdriver extension:
The biggest con is that on the other sidethe baseplates (and bins) will be pressed up against the side of the drawer. This means the bins might not sit flush to the baseplate since the drawer finish will push some of them to the side. This is a bigger problem on shallow drawers and not as much of an issue on deeper ones:
To address this i've made a different model that distributes the bins with 10mm per side - you lose the convenience of the long tool storage, but things look more organized. You can find it here:
https://www.printables.com/model/827676-us-general-26-v2-toolbox-gridfinity-refined-centra
You can, of course, mix and match on a per-drawer basis.