1 / 2
Filler Filament Holder (orig. HugoHuge) — zdjęcie 1
1 / 2

Filler Filament Holder (orig. HugoHuge)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix for the side mount on the Prusa Enclosure

Ocena
0 / 5
Polubienia
1
Pobrania
20
Wydruki
0
Wyświetlenia
295
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print with organic supports.

Either print 2 of the plastic bearings (I would suggest in ABS, ion possible) or use 2x608 bearings.

print the spool on its end with snug supports.

Tagi