1 / 2
Big Lego Pizza — zdjęcie 1
1 / 2

Big Lego Pizza

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Huge version of the classic Lego pizza tile.

Ocena
0 / 5
Polubienia
60
Pobrania
170
Wydruki
0
Wyświetlenia
1552
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

First model I'm posting here! This is a scaled up version of the classic Lego pizza tile.

The model by default is 220mm in diameter, it should be scalable to some degree but do keep in mind the parts are designed to press fit, so scaling the model will change how tight or loose that fit is.

I recommend printing the “crust” with supports for the underside, the other parts can just be printed with a brim if necessary for adhesion. Use whatever infill percentage and layer height your heart desires. (I went with 10% Gyroid and .2mm though)

After printing the parts should simply press fit together, if needed though they can also be glued in place.

Filaments I used:

Bambu Basic PLA - Yellow

Bambu Basic PLA - Red

eSun PLA+ - Olive Green (PLA+ isn't a necessity, I just like the color of this one.)

Enjoy!

Tagi