1 / 4
BlueSCSI v2 "Initiator" Drive Bay Mount for Macintosh SE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount BlueSCSI v2 "Initiator" to the upper floppy bay of the Macintosh SE.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Quick and dirty mount to allow you front panel access to your SD Card for the BlueSCSI v2
“Initiator” on the Macintosh SE.
Use one of the main brackets (with or without “Authentic LED Hole”) to mount the BlueSCSI, then use the required brackets with two small screws to mount the entire unit into place in the original Hard Drive mount holes on the back of the Floppy Drive frame.