Princess Leia Hueforge 220x220
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leia done with Hueforge. Picture created with AI
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings in framed and unframed versions.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
Swap Instructions:
Start with Black
At layer #30 (1.36mm) swap to Blue
At layer #44 (1.92mm) swap to Ice Blue
At layer #45 (1.96mm) swap to Brown
At layer #52 (2.24mm) swap to Mandarin Orange
At layer #56 (2.4mm) swap to Yellow
At layer #58 (2.48mm) swap to Jade White
At layer #73 (3.08mm) swap to Ice Blue for the rest.