BMW I3 Parcel Shelf Buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parcel shelf buffer to replace BMW part 51466967605. I designed and trialed this on a BMW I3 but i believe it is also…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1073
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Parcel shelf buffer to replace BMW part 51466967605. I designed and trialed this on a BMW I3 but i believe it is also used on a variety other models. It is optimised for a standard TPU flexible filament with a Shore hardness of about 85A/40D. It requires no support but needs a tab to be cut out after printing. The main advantage over the original is that you can print it in whatever funky colour TPU you happen to have.
The design for the clip is available elsewhere on thingiverse https://www.thingiverse.com/thing:4737155
I believe it will fit the following models
1′ E81 (02/2006 — 12/2011)
1′ E87 (02/2003 — 02/2007)
1′ E87 LCI (01/2006 — 06/2011)
1′ F20 (07/2010 — 02/2015)
1′ F20 LCI (05/2014 — 06/2019)
1′ F21 (07/2010 — 02/2015)
1′ F21 LCI (05/2014 — 06/2019)
2′ F45 Active Tourer (11/2013 — 04/2018)
2′ F45 Active Tourer LCI (04/2017 — 12/2019)
i3 I01 (01/2013 — 10/2017)
i3 I01 LCI (01/2017 — 12/2019)
X1 E84 (09/2008 — 12/2015)
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
No
Supports:
No
Doesn't matter
Infill:
Doesnt matter
Filament:
Ninjaflex TPU
Notes:
This is designed to be printed without supports but the central tab in the t-slot (marked by a slightly depressed region) has to be cut away before it is fitted.
Category: Automotive