Voron Trident heatbed thermistor JST junction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect the heatbed thermistor through a JST connector such that hearbed removal becomes very easy.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
When building the Voron Trident I realized that the heatbed is partially permantly connected. Heatbed power is connected with the WAGO junctions, the Z-stop switch is connected by a JST connector but the heatbed thermistor was permanently wired. As I want to be able to remove the heatbed without too much trouble I created this little element that will hold 2 JST (female) connector. One will accept the connector towards the thermistor, the other will accept the wire towards the controller. Internally the 2 female connectors need to be wired.