Renault Zoe R135 ZE50 phone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone holder to fit the front tray on the Zoe R135 ZE50. The holder incorporates a usb type C in the centre which…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 1192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Phone holder to fit the front tray on the Zoe R135 ZE50. The holder incorporates a usb type C in the centre which should fit quite a few phones, the fitting is modeled on the layout in the Tesla model 3 holder. With the holder in place both USB connectors and the 12v lighter socket are still accessible.
The cutout for the USB is designed for a short barrel shaped right angle connector, the cover is held in place by a pair of 3.5x15mm countersunk self tappers and the platen needs to be glued to the base
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
No
Supports:
No
Doesn't matter
Infill:
Doesn't matter
Filament:
Doesn't matter Doesn't matter Doesn't matter
Notes:
I printed this without supports with the cover top surface printed downwards to give a nice appearance from the textured bed.
Category: Automotive