VW UP, Citigo , Mi, spacesaver wheel knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the VW Beetle spare wheel hold down knob with a reduced height to allow it to grip thinner wheels…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 463
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a remix of the VW Beetle spare wheel hold down knob with a reduced height to allow it to grip thinner wheels or for cars with a raised hold down nut. I have made this for use in a Skoda Citigo with a spacesaver spare. The previous design, which this is remixed from, bottoms out against the boot floor just before the wheel is fully clamped so i have taken 5mm of the height (initial extruded boss reduced from 15mm to 10mm). An M8x30 bolt pressed in easily and works fine.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
No
Supports:
Yes
0.2mm
Infill:
15%
Filament:
MG94 ABS
Category: Automotive