1 / 6
Snap Guard for Oral-B Series 9
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-on protector for your Oral-B iO toothbrush that prevents falls and adds color – even with single-extruder printer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a drop protection accessory for the Oral-B iO Series 9 toothbrush. It snaps directly onto the original charging base and prevents the toothbrush from being knocked off.
Why
Since the iO toothbrush is only magnetically attached, I often found it falling to the floor. To solve this, I designed a practical snap-on holder that provides a more secure fit – without modifying the base.
Benefits
- Fits directly onto the base
- Easy to remove and clean
- Print in your favorite color – even with single extruder setups
- No supports needed
Versions
- Single Extruder: SnapGuard_base, SnapGuard_neck
- Multimaterial: SnapGuard_MM
Assembly Instructions
- If printed with a raft, remove it.
- Cut the small support tabs between the clips (base) with a knife.
- Snap the neck onto the base.
- Snap the assembled SnapGuard onto the toothbrush charging station.
Tips
- For best results, orient the seam line to the back.
- Trouble with bed adhesion? Try printing with rafts.
| Rafts | No / Maybe |
| Supports | No |
| Resolution | 0.15 |
| Walls | 2 |
| Infill | 15% |
| Material | PLA |