the content vase - a vasemode print with a bit to glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy vasemode-print with arms to print normally and glue on later
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This vase was designed by myself after a vase i saw somewhere.
It has some features the original vase did not have, and i made it printable
with the main body in vasemode, and the arms seperatly, without vasemode,
to glue the arms on later.
For printing the main body its best to either print:
- with a 0.4mm nozzle in 0.2mm layer height and 0.8mm layer width
- or with a 0.8mm nozzle in 0.4mm layer height and 1.4mm layer width
For the arms its not that important. :)
You need a printer that can print 250mm in height, OR you scale it a tad down.
Dont forget to also scale the arms in the same factor then! :)