Safety 1st Child Gate Unlock lever replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved lever for Safety 1st Auto-Close gate
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 560
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
We have multiple of Safety 1st automatically closing ports and all broke eventually. Part that breaks first is the lever that prevents pressing the button to bottom and opening the port.
After finishing my design, I noticed the existing design in here. But there are few differencies. In my model I added small notch to prevent the lever pending and removed the thicker part below the spring tap. I believe those two parts are the main reason why the part breaks easily. See the pic below (on left is the original part and right is printed part).
Printing
Print with supports so that spring tap is pointing up (see the pic). I printed mine with 0.3mm layer height and 0.6mm nozzle, but it shouldn't matter too much. I did some tests with PLA and while it worked, I think PETG might be better material in here. Don't know how long it will work as I just printed these. I can report long time usage reports in the future.