Prusa MK3/S/S+ Heatbed Standoff Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip-on holder to position the standoffs in place whilst reassembling the heatbed.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I found myself removing and reassembling the heatbed on my MK3S a few times while I was trying to sort out the y-axis rattle from the linear bearings. One thing that was really frustrating was trying to individually align all 9 of the standoffs.
These little clips attach to each of the 8 outside corners of the y-axis assembly, and self-align using a little nub that locks into the through-hole. They hold the standoff in place snugly, and can then be pulled out when you have the screws in. You will still need to manually align the centre standoff, but aligning one is far easier than aligning all 9!
Printed in PLA with a 0.2mm layer height.
You will need to print 8 of these.
Note:
The thickness of my y-axis carriage is 6mm. I've seen on some technical drawings that some carriages differ. If your carriage is different then let me know the thickness and I can create another model to suit different versions.