KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printable or Laser Cuttable kinetic drinks coasters. Turn them by hand, link them up & connect them to the motor.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 1125
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you do like this project - please press the like/heart icon here on Printables. It's super helpful for future projects. Thank you. ☺
I'll show you how to build your own mesmerising table top coasters. A practicable and fun arts project for all ages and abilities.
Laser Cut or 3D Print these amazing and customisable coasters.
Etsy Store Kits with or without pre-cut wood: https://diymachines.etsy.com/listing/1693030560
-- Creality Falcon 2 22w Laser Cutter & Engraver: – https://geni.us/CrealityFalcon2-22w
-------------------------
List of items used in this project and where to find them:
- 3mm Sheet Plywood or similar https://geni.us/3mmPlywood
- AA Battery Holders (x2) https://geni.us/AABatteryPCBMount
- Small Geared DC Motor (x1) https://geni.us/MiniGearedDCMotor
- Super glue https://geni.us/SuperGlueLongNeck
- Tiny magnets 3x3mm (4 for the base, 8x per coaster) https://geni.us/3x3mmMagnet
- Batteries https://geni.us/AABatteries ■ Reed switches - Normally Open Type. (x4) https://geni.us/ReedSwitch
- And some Bolts and screws (M4x5mm x four and M1.6x3mm x two)
- Projects PCB: https://www.pcbway.com/project/shareproject
- These are some of my favourite tools I use and can recommend:
- Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
- Bosch Bit Driver: https://geni.us/Bosch-Screwdriver
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
Wiring diagrams, FAQ etc can be found here: https://www.diymachines.co.uk/make-your-own-kinetic-coasters
SAY THANKS: Provide continual and dependable support through Patreon: https://www.patreon.com/diymachines
Or join this channel on Youtube Memberships: https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: https://ko-fi.com/diymachines
SUBSCRIBE:
- https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
- INSTAGRAM: https://www.instagram.com/diy_machines
- FACEBOOK: https://www.facebook.com/diymachines/
- ETSY: https://www.etsy.com/uk/shop/DIYMachines
========== List of camera and lighting equipment I use:
- Sony A7 III: https://geni.us/Sony-Alpha7-III
- Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
- Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
- Aputure MC: https://geni.us/FAPGL
- RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
- Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
- Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip
Disclaimer: This video is shared for demonstration purposes only.