1 / 3
MK3S+ MMU HGX Extruder Gear Kit — zdjęcie 1
1 / 3

MK3S+ MMU HGX Extruder Gear Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade for MK3S+ estruder using HGX Extruder Gear Kit. Compatible with MMU.

Ocena
0 / 5
Polubienia
19
Pobrania
77
Wydruki
0
Wyświetlenia
997
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

===================================================================

!!! Important notes !!!

  • In my case the pulling power is not the same as a NEMA 17 motor. Or i bought wrong "week" motor :( . With MMU i have issues, but In single color setup is everything ok. (shorter bowden and less friction)
  • Steps per units E1130.00

===================================================================

Assembly is similar like for original prusa extruder.

(5. E-axis assembly: https://help.prusa3d.com/guide/5-e-axis-assembly_28536)

Some differences in picture:

Extruder_body is connected to carriage same way like original.

 

Insert bearings (green) and M3 nuts (blue).

 

Insert the double gear.

 

Use two screw M3x12 to secure assembly with motor.

 

 

Insert the drive wheel and hotend.

Now is assembling same like for original.

Tagi