Darth Vader Tie Fighter (single filament print) - better components separation (only 6 plates of components)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have optimized the wing and the cockpit components for better single filament print. I give credit to Martin Dobšovič.
- Ocena
- 4,857 / 5
- Polubienia
- 904
- Pobrania
- 2537
- Wydruki
- 10
- Wyświetlenia
- 13 304
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
Hello guys!!
I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated the black parts of the wings to enhance definition and visual appearance during printing. This approach has allowed for greater precision in details and better integration of different colors, further enhancing the overall design of Darth Vader's Tie Fighter Starship.
-------------------------
UPDATE 7.4.2024: insert STL file as users request. Remeber to print the black cockpit glasses a little smaller to make the insert in the grid much easier.
-------------------------
I printed it in PETG and PLA.
In the 3mf files you will find 6 plates of components subdivided by colors and print settings.
Print Tip:
- Grey Parts:
- 0.2 print quality;
- 15% Infill,
- 3 wall,
- 3-4 upper and lower layer.
- for big pieces of central cockpit part better put some outside brim.
- Black Wing Parts (IMPORTANT):
- 95% infill with “adaptive cubic” texture;
- NO upper and lower layer.
- Black Other parts (glasses and similar):
- 0.2 print quality;
- 15% Infill,
- 3 wall,
- 3-4 upper and lower layer.
Please post your makes or comment to give me some advice to improve design!
Looking for collaboration :-) feel free to contact me