Dewalt 20v DCF894 1/2" Impact Wrench Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the DeWalt DCF894 20v cordless impact wall mount.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 506
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a wall mount for the DeWalt DCF894 20v cordless impact. It has two vertically spaced 4.5mm holes, so you can mount it to a stud using #9 x 2" deck screws, or similar.
This requires 4 m3 heat set inserts and 4 m3x10 socket head cap screws. The holes are 3.9mm diameter and 6mm deep, so will fit the common m3 heat set inserts, such as those used in the Voron 3d printer builds.
The part that holds the front of the impact (barrel hook), has an integral support that needs to be broken off and thrown away after printing.
For colored text infill, simply switch filament at the appropriate layer.