Ohio Northern University ONU Wall/Desk Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polar Bear Up! Layer heights for filament color change are 4.00 MM (change from orange to white) and 5.50 MM (change…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Polar Bear Up!
Layer heights for filament color change are 4.00 MM (change from orange to white)
and 5.50 MM (change from white to black).
I put the infill at 20% to make the pattern smaller. If you want the pattern to disappear completely, set infill to 100%.
There is a hole in the back to hang it on the wall which will fit a drywall screw and hold it in the recess nicely.
Included .3mf file is for Prusa printers MK3.5 - 4.0
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3.5
Rafts:
No
Supports:
No
Resolution:
20
Infill:
Any
Filament: Any PLA Orange, White, and Black
Notes:
Layer heights for filament color change are 4.00 MM (change from orange to white)
and 5.50 MM (change from white to black).
Category: Signs & Logos
