1 / 3
3DS Cover Plates
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created some cover plates for the New 3DS
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 2893
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (37)Powiązane
Here are some Cover plates for the New 3DS. A Poke Ball front cover, a Stylus Holder and a back plate with SD card access.
Printed on Sovol 06 Plus
.20mm Layer Height
20% Infill
Use support if needed for the small overhangs on the clips. You might need to trim/sand the bottom clips to fit into the 3DS holes. FYI, the back SD card file doesn't have the holes for the screws. The files are a work in progress.
Feel free to comment on any improvements and or remix