Magnetic IPA Pad Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple box with back magnets to hold stacks of single-use IPA pads.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
New to 3D printing and this is my first model, so I kept it simple. This is just a simple box that has 4 small 2x6mm magnets glued into the back to allow it to be attached to something magnetic or you can just stick some double-sided tape on it to attach it somewhere as well like I did to the side of my printer case.
The box is sized to fit the average-size IPA double-pack disposable pads that I buy online and use for cleaning off my fingers, the ends of tools, or all sorts of other uses around the shop. I threw a few random hexagon cutouts on its face to give a little flair, but otherwise just a simple box.
Printing:
Did not print with supports on the tops of the hexagons and it worked fine on my X1C with PLA Basic.
Additional Parts if desired:
4 - 2x6mm magnets glued in at the correct polarity to stick to a metal surface.