Attic folding ladder rope pull handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle for the rope hanging from my folding attic pull down ladder. I've got great big hands, so i scaled it…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 293
- Wydruki
- 6
- Wyświetlenia
- 1073
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Handle for the rope hanging from my folding attic pull down ladder. I've got great big hands, so i scaled it accordingly. My fist width is about 90mm, so I rounded up to 100mm for comfort. The print grain opposes the direction of pull, so it's got some added strength. I printed at 10%, and it's working just fine. I've chamfered any edges that contact the rope, so you should be able to get several decades or use out of this. The rope holes are 5mm, so if you've got a big fat rope, you may need an intermediate string.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Doesn't Matter
Supports:
Doesn't Matter
.3
Infill:
10%
Filament:
Hictop PLA Orange
Notes:
I printed at .3mm, and as fast as I possibly could. .2 with a moderate print speed would probably yield much better results, but I use this about 10 times per year, and I just wanted it done fast.
Category: Household