1 / 1
Sy's Peglock Gridfinity 1x3 with shorter back
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Peglock gridfinity with shorter locking pieces.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 293
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (40)Powiązane
I found that the dovetail on the back had an excessive height that blocked the holes above. This one has a shorter back. There is a support running between the two locking plates.
