Gecko Fridge Magnet - 10x3mm version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified to accept a 10x3mm magnet since I had more of those than the 8mm ones. Thanks to HEIados for including a very…
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 607
- Wydruki
- 21
- Wyświetlenia
- 1680
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Remix of ( https://www.thingiverse.com/thing:3337602 )
Modified to accept a 10x3mm magnet since I had more of those than the 8mm ones.
Thanks to HEIados for including a very nicely done Fusion 360 file to work with! To get the 10mm magnet to fit within this tiny body, I had to decrease the diameter of the hole margin a bit.. it is 10.5mm, but I think should be plenty tolerance for most printers. Also I moved it up so it is now 1mm above surface instead of 0.6mm. This will mean a bit less magnet strength but the magnet is bigger too, so seems to balance out.
See source of this remix for the author's instructions for stopping printer to drop in magnet.
Category: Kitchen & Dining