1 / 1
Gantry levelling blocks, Ender series and others — zdjęcie 1

Gantry levelling blocks, Ender series and others

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Levelling blocks for ender style printer gantry's

Ocena
0 / 5
Polubienia
2
Pobrania
57
Wydruki
0
Wyświetlenia
219
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Levelling blocks for ender style printer gantry's

i didn't trust the 2 glue stick setup and didn't want to buy 123 blocks just for this so made these, they are basic but work well, the measurements on the top and side are for reference to see how accurate the prints are the important thing is they are the same hight 

 

Print with 4 walls and i used 10% lightning infill and it worked well for me, but if your worried about cooling use support cubic or similar 

https://youtu.be/XKfBrdIKFyQ?si=KSYOYJWPCEYAmMGq

Tagi