Drill Dust Collector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sticks to the wall and extracts the dust when connected to the dust extractor. This leaves your hands free for drilling.
- Ocena
- 4,919 / 5
- Polubienia
- 2133
- Pobrania
- 7311
- Wydruki
- 82
- Wyświetlenia
- 32 926
- Oceny
- 74
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Drill Dust Collector sucks to the wall and removes the dust when connected to a dust extractor. It has a 35mm diameter hose size, which should accommodate most workshop vacuums (I am unsure about home vacuums). Can drill holes up to 25mm.
It is designed so that you can attach foam tape to the rim. This will protect your walls from scratching and provide a better seal. This is the foam tape that I used.
If you are looking for a good Shop Vac that won't break the bank, then this is the one I use Fein Shop Vacuum.
Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. The product links below may be affiliate links.
Nozzle: 0.4mm
Layer Height: 0.20mm
Infill: 15% with Rectilinear Pattern
Orientation: Orientation is important, see image
Supports: None Required
Brim: A large brim is recommended
I would recommend printing this print PETG rather than PLA for increased durability.
I hope you find this model useful. If so we would love it, if you can give us a LIKE. |