RPi Camera Case for Fisheye Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDIT 6/18/2015: I added "fixed" versions of the STL files that have been run through netfabb. Use these instead. I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
EDIT 6/18/2015: I added "fixed" versions of the STL files that have been run through netfabb. Use these instead.
I found this camera on eBay and prefered it to the official Raspberry Pi one. It has a mounted fish eye lens that can adjust focus, and generally looks sharper than the stock lens.
This case will hold the above camera and mount onto my Printrbot Simple Metal RPi Camera Bed Mount.
From the outside it looks almost identical to the old case, but here are videos of it in action:
Category: 3D Printer Accessories