Sunglasses Retainer in TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Most likely stronger than your sunglasses
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 486
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Strong and lightweight, I believe my sunglasses would break before the retainer! The model was designed to fit my Maui Jim sunglass frames with dimensions of 9x4mm at the attachment point.
Printed in Inland TPU from Microcenter which is a TPU95A. TPU was dried and then printed directly from a Sunlu S2 filament dryer with near perfect result with the embedded Bambu Studio Inland TPU filament print profile on a Bambu X1C.
layer height | variable |
nozzle size | 0.4mm |
nozzle temp | 240C |
plate temp | 50C |
build plate | G10 with gluestick |
support | none |
infill | 100% |
filament | Inland TPU (95A) |
V11 has filleted edges to reduce sharp edges. Should be great, but I haven't actually printed the file, so I'm leaving v10 up.