1 / 2
Volvo Rotating Gyro Keychain PRINT IN PLACE MMU — zdjęcie 1
1 / 2

Volvo Rotating Gyro Keychain PRINT IN PLACE MMU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple rotating keychain, that can be printed in place. Support for MMU

Ocena
5 / 5
Polubienia
16
Pobrania
169
Wydruki
1
Wyświetlenia
574
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hey,
This is my model of the Volvo keychain.
It's compatible with MMU, but you can also use one extruder and manually change the filament (for the cut version, it's only 3 filament changes).

For the Print in Place version, you have to wait until the keychain cools down well and then start manipulating it until it starts rotating.


I am also attaching the version that is already cut.
Advantages of this solution:
- fewer changes of the filament
- smoother movement (you can sand the mechanism before assembling)
- both sides of the pendant will have the texture of the table

The cut version is best to be glued after printing.

I recommend using supports for the cut version.

 

Tagi