1 / 2
Pico 4 Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for Pico 4 VR Headset and Controllers
- Ocena
- 3 / 5
- Polubienia
- 40
- Pobrania
- 448
- Wydruki
- 0
- Wyświetlenia
- 1880
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (50)Powiązane
This is a vertical stand for the Pico 4 VR Headset and its Controllers.
Split into multiple pieces for easy printing. The highest part is about 20cm high. Pieces slot together with a relatively high amount of play.
Needs gluing together after printing.
Supports are only needed for the slots when printing. I used 3 wall loops and 25% infill.