Photo frame for KODAK Mini 2 Retro P210R (5.3x8.6cm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for photos printed with the Kodak P210 R photo printer. Can be placed vertically or horizontally.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This frame was designed for photos printed with the Kodak P210 R Photo Printer and can be placed vertically or horizontally. Photopaper dimesions of this printer are 5.3 x 8.6 cm.
The frame is tilted at 7 degrees backward for a better view of the framed photo.
Print time is around 2h 31m at 0.20 layer heigh (0.4 mm nozzle).
Print parameters:
- Layer height - 0.20 mm (0.16mm if you want a smoother surface)
- Perimeters - 3
- Infill - 10% is sufficient (infill type doesn't matter, I've used Lightning)
- Brim - YES
- Support - doesn't matter (I've print the frame without supports)
- Raft - doesn't matter
- Filament type - PLA
Note: Depending on the surface where it's laid, sometimes the photo frame can result a little bit unstable(tends to fall back) but nothing serious. I'm aware about this small issue and I'm working on it.
Update: Version 2 - stability improved.