KLP1 WobbleX Module - Fix Z wobble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use wobbleX to defeat the Z-wobble you encountered on KLP1!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1050
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Your KLP1 has an ugly Z wobble? This is caused by the Z screws not being aligned and is very difficult to adjust on this machine.
Welcome to the ultimate solution, wobbleX. The prerequisite for using this printable part is that you have purchased the wobbleX WS8 version and have two extra M3X30 screws and four M3 heat inserts (M3X6X5 same as voron use).
!! The part witch has heat insert is screwed with hot bed. !!
Hats off to the developers of wobbleX for making 3D printing one step closer to people's lives.
The original developer page is here: https://github.com/MirageC79/Interfaces-for-WobbleX-integration
Print Settings
Printer Brand:
VoronDesign
Printer:
Voron2 Custom
Rafts:
No
Supports:
No
Resolution:
Infill:
15%up
Filament: ABS
Category: 3D Printer Parts