Tardis - Multi Material
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of the tardis model by dSASQUATCH707 to print on multi extruder 3d printers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
remix of the tardis model by dSASQUATCH707 to print on multi extruder 3d printers.
Small text on smaller scales may not print in this case set to the same colour as the backing plate you can then write this text in yourself or print a picture to the correct scale to stick in it's place
How I Designed This
Step 1 - Split Into Parts
Using the existing model I split it down into the parts I wanted different colours
Step 2 - Save Individual Parts
Once I had split the design into the parts I wanted I saved them as individual part files
Step 3 - Tweak Models
I then tweaked some of the parts to recess the text in on the top and added text to the information panel. Shifted the lock and handle around on the front to match source images.
Step 4 - Create an Assembly Model
Using the individual parts you can then create an assembly model which will allow you to save as an STL with all the parts correctly positioned
Step 5 - Save as STL/3MF
Once happy all parts are correctly positioned save out as an STL/3MF and then when you load into slicer it will recognise the individual files as one part and arrange accordingly
Step 6 - Print
Category: Props