Two Piece Wall Mount Propane Torch Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted propane torch holder for 3" diamter propane (Blue) and MapGas (Yellow) bottles.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Easy to print two piece wall mounted Propane Torch holder. The two piece design makes printing easy but you will need to ensure the parts are aligned on the wall so the torch sits in them correctly. This was easy to do by mounting the top ring where I wanted it first then slipping the torch bottle into the ring and aligning the bottom section. I marked the wall in an 'L' shape on one corner of the base then removed the bottle, leveled the base and affixed it to the wall. This will hold any 3" cylinder. Could be used for the Oxy-Propane jewelers torch if you print two of them. I have put three around my shop where my various torches stay. Mounting holes are 0.165" in the CAD file but your printer accuracy determines the final hole size. I used 1-¼" long number 8 or 9 screws to affix mine to the wall.