Meteor85 Frame Drill Adapter for Mobula8 EX1103 Motors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Drill guide to Drill holes for EX1103 on the Meteor85 frame
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Mobula8 Frame is soo damnn easy to break, its better to switch to the more durable Meteor85 frame.
The Original EX1103 motor screw pattern is different from what betafpv uses on the meteor85 so its necessary to drill the fitting holes for them.
I also recommend to drill out the little tubes and use a m2 Screw that goes through canopy, rubber dampeners and frame and are tightended with washers.
Depending on the exact lipo size it might not fit anymore, maybe needs a different mounting solution or some lipo straps.
The Parts where the screws go through need to be dremeled or cut down so the lipo does not rub against the screw heads.
its alot of work, but imo worth it since it holds up alot more crashes.