Replacement anti tip bars for BSD Racing RC Dirt Bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits models- BS403T & BS404T requires 4-MR128K bearings. also needs a small amount of on the pins and bearing holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
The original bars that come with the bike are just flexible plastic tubes. They wear out very quickly. Especially if you're just learning to operate the dirt bike. My design should last a very long time. Depending on how rough you run the bike will dictate what material to print the parts out of. I recommend ABS or PETG. “I AM IN NO WAY RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR DIRT BIKE AFTER YOU INSTALL THIS ITEM!” It is in no way meant to protect the dirt bike! It's intended purpose is to assist in keeping the dirt bike upright while learning to operate the dirt bike.