1 / 2
Milwaukee M12 Battery holder from @Thomllama with pitch adjustment
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
with pitch adjustment for wurth tool wall
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
The model is only slightly modified to match the spacing of the holes for Wurth tool wall.
ORIGINAL IS THIS ONE: https://www.printables.com/cs/model/119513-milwaukee-m12-battery-holder-new-version-5/comments
We use these dowels https://www.printables.com/cs/model/830149-tool-holder-for-square-perforation-base-plate-wurt and 4mm screws for attachment