Black+Decker Jigsaw (KS801SEK) anti-splinter plate (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remake of the Anti-splinter plate accesorry of the Black+Decker KS801SEK Jigsaw. Parametric model to adjust the slot.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I didn't see it directly but my jigsaw was crooked due to two holes being drilled non-horizontal internally. It resulted, at first, in my jigsaw cutting into the plate and ended up shattering it completely after some use. I remade the piece and added the possibility to angle the guide slot in fusion360 to help circumvent the problem.
This piece should fit snuggly in place, I recommend using PETG to be able to flex it slightly in place to really have a good fit. PETG will also withstand the use and environment of working with a jigsaw.
You can take your model one step further by trying to print it transparently. To do this, you can follow the instructions from here: https://www.printables.com/fr/model/15310-how-to-print-glass.