Storage drawer system for Aerogarden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This provides a place to store all of the components of the 50 pod grow anything seed kit for the AeroGarden
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a place to store all of the stuff one gets with the 50 pod grow anything seed pod kit for the AeroGarden. This has 4 drawers; one for the bottles of liquid fertilizer. one for the grow baskets, one for the grow sponges, and one for everything else. It is styled to go with the AeroGarden.
The drawer handles are designed to print with no supports and are integrated into the drawers. Made the drawers thick enough to print with 2 perimeters. The drawers were not strong enough with only 1 perimeter.
Printed in PLA with a 0.6 mm nozzle with a layer height of 0.32 mm. Should work fine with a 0.8 mm nozzle with a layer height of 0.55 mm or what ever you have on your machine.