1 / 3
Airbus A320 Rudder Trim Mechanism - V2 — zdjęcie 1
1 / 3

Airbus A320 Rudder Trim Mechanism - V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Realistic 30 degree sprung return rudder trim mechanism using microswitches

Ocena
0 / 5
Polubienia
28
Pobrania
377
Wydruki
0
Wyświetlenia
1604
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mechanism to create realistic 30 degree sprung movement for rudder trim knob. Works with pair of microswitches.

Designed to work with my Rudder Trim Knob:

Airbus A320 Rudder Trim Knob by MANTOGA | Download free STL model | Printables.com

Design is spaced away from panel to allow backlighting

Base and Top Cover can be printed in PLA, 50% infill. Cam Arm, Cam Actuators and Lower Shaft Clamp printed in PETG, 100% infill for strength.

V2 - Modified Top Cover to strengthen support pillars and add mount for LED backlighting Light Pipe copied across from Rotary Switch Knob

Light pipe printed in transparent PETG, 100% infill.  3, 3mm LEDs are used to illuminate marker line on knob

Zip file for PCB for LEDs is included

Additional Parts required:

6mm Brass rod, 120mm length

(3) 12mm OD x 6mm ID x 4mm Thickness Sealed Bearings

8mm diameter x 30mm extension spring

M3 and M4 Cap Head Hex screws

M3 Grub screws

(2) 20mm x 11mm Microswitches

3 x 3mm warm white LEDs

1 x 150 ohm 1206 SMT resistor

 

 

Tagi