1 / 3
Hornady Seating Stem for X-Treme 9MM Plated Bullets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Factory seating stem was leaving a ring from the interface between bullet and seating stem, so I modeled this seating…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Factory seating stem was leaving a ring from the interface between bullet and seating stem, so I modeled this seating stem with the profile of the X-treme bullet for the Hornady Seating Die. I printed at .12 layer height, 95% infill, and 0.36 line width with a 0.4mm nozzle, sliced in Cura with exclusive tolerance.
Category: Tools