1 / 6
Bulkhead Style Dual NEMA 5-15 Cord Grommet — zdjęcie 1
1 / 6

Bulkhead Style Dual NEMA 5-15 Cord Grommet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

adapted another design to pull 2 power cords into an IP65 demarcation case for pond and garden irrigation control

Ocena
0 / 5
Polubienia
6
Pobrania
29
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Bulkhead Style Dual NEMA 5-15 Cord Grommet is a single grommet adaptation of the kabeldurchbruch 3 grommet designs.

Created a fixture to pass two nema type plug cords in to an IP65 demarcation box housing the smart power strips & my IOT controls for pond/garden pumps, dosing, irrigation & heating controls.

Shooting for an IP6x enclosure, I added gasketing space around the cords for a piece of low durometer closed cell 1/8" thick by ~½" wide sheet silicon. 

I would trust this on about ¼" max thickness material

Fits a 35mm (~1-3/8") hole

I printed this as usual on my taz4, fine detail sliced in Lulz Cura, 3 wall, 4 top/bottom, 20% infill triangles, brims, 90% feedrate, 210C hotend w 62C plate using polymaker flat black 2.85 PLA, took just under 3 hours to print and about 28 grams.

Fusion f3d, stl & gcode included in files

Tagi