JCD 8898 VESA 100x100 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently bought a JCD 8898 hot air soldering station. Unfortunately, I have very little space in my "office" so I…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently bought a JCD 8898 hot air soldering station. Unfortunately, I have very little space in my "office" so I came up with a VESA 100x100 mount. Together with the cheapest monitor desk holder, it works great.
I created three versions of this mount.
I did not print the first one at all.
The second one looked much better and worked quite well, I only found that there is a lot of space on the base and I could put the bit holders there and that's how the third version was created and for now I think the final one.
Recently, I have become a fan of threaded metal inserts. Therefore, eight M4x5mm inserts are needed for the holders in versions 1 and 2.
In the third version, there are additionally three M3x7mm inserts (they can be shorter).
I have printed my mounts in PETG, but with the overall wall thicknesses used, everything will be fine.
In my case:
- shell wall line count - 3
- 10% infill - 2 lines / walls
On tip holder part there is place for a small magnet fi6x3mm. It was supposed to hold the hot air tips better, but it turned out to be unnecessary in my case.
I hope it will be useful to someone.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2
Infill:
10% - 2 lines/walls
Filament: Print-ME PETG Swift PET-G BLUE
Category: Tool Holders & Boxes