Cricut Tool Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box for the provided tools and one additional compartment for other stuff. The box is closed by an sliding door
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 779
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Box is designed so that the sharp metal are hidden below an overhang creating a separate compartment for other stuff. The tips cannot be touched grabbing into the box if placed in with tips first. Dimensions are as small as possible to allow for a small rigid box, where the tools still fit in. The Spatula needs to be places a little bit diagonally.
Printed PLA with 5% cubic infill and experimented with top fill pattern.
Side note: I added a bit of an indent into the sliding door to hold it shut. However, i assume it is too small an does not work. Nevertheless an issue that helped. When finished printing the sliding door, i pulled it from the printing bed while hot (60°C) resulting in a small curvature in the door plate. In the middle it is 2mm higher then at the front and rear when placing on flat surface. This allows for some minor resistance when sliding in and out and not sliding open just by gravity.