1 / 3
C-irrigation ring - larger version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 25% larger version of my popular C-shaped irrigation ring, this one requiring use of 5mm ID tubing.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane
My earlier 96mm version was designed for 4mm ID tubing. Whereas this one requires 5mm ID tubing the nipple/ring joint can see more stress in handling and in final placement. Therefore more care/means might be required to stress relieve that joint in deployment. Please use metric specified tubing size, not the Imperial equivalent for a good seal on the nipple. Print without supports.