Makita; pj7000; hose adapter; schlauchadapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,20 € – 2,69 € netto (bez VAT)
Dla pliku: Makita Absaugadapter_0.4n_0.15mm_PETG_MK4IS_2h37m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,44 € netto (środek widełek).
- Masa podana przez autora
- 29 g
- Czas druku podany przez autora
- 2,61 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
hose adapter for makita pj7000 to fit kraenzle and festool vac hoses
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
mostly every owner of a makita pj7000 knows the problem with the vac hose connection - it doesn't fit to most european vac models. So i made this part here, just open the lid like for changing the sawblade and pull out the adapter. You have to use the o-ring from the original one. Mount everything back together. You'll end up with a proper vac hose connection on the pj7000. Works for my Kraenzle vac and also fits the festool hoses.
This is my second attempt, the first one broke between the layers. So i turned it on the slicer and used some organic support.
First layer 0.3mm, then 0.15mm. PETG and 100% infill.