Adjustable foot with anti-vibration/slip pad for 3030 profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable foot for 3030 extrusion profiles (from Motedis). I use these on my Hypercube Evolution. Note that the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An adjustable foot for 3030 extrusion profiles (from Motedis). I use these on my Hypercube Evolution.
Note that the top part is fastened with an M8 screw into the Aluminium profile, the lower part screws in the top part and also has a rubber damping foot attached to it.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.15 with 0.25 1st layer
Infill:
50
Notes:
The yellow PLA was printed on an Anet A8 with 0.2 mm layer thickness. The black PETG feet are printed with the Ultimaker 3 E at 0.15 mm using 4 perimeters and 1.15 mm bottom and top.
Category: 3D Printer Accessories